SDF  series

5/2, 5/3 WAY (18mm width) PILOT SOLENOID VALVE G1/8"

SDF Compact valve are perfect for application where space savings are a must

Lead wire comes stripped and preattached to the coil (DIN coil are available as optional).

SDE  series

5/2, 5/3 WAY SOLENOID VALVE G1/8"~G1/2"

SDE valve has identical design as SDF valves. To install at a space restricted area, it requires. manifolds in number of station configuration for easier assembly. SDE'S body is Hard Anodising coated surface creating a hardness & scratch resistibility, and a durable valve, using life.

SDA/B/C/G/S/R/M/L series

2/2, 3/2, 5/2, 5/3 WAY SOLENOID VALVE G1/8"~G1/2"

SDA/B/C/G/S/R/M/L valve are widely suitable for various applications/locations requirements.

2/2, 3/2 way direct & pilot types offer large & small air flow rates.

5/2, 5/3 way standard type are available for port size 1/4", 3/8", 1/2"

SDY, MTY  series

5/2 WAY SOLENOID & PNEUMATIC CONTROL VALVE G1/8"~G1/2"

Suitable for small bore, single acting cylinder and electric of air interface application.

¡@

MTG/A/B/C series

3/2, 5/2, 5/3, WAY DIRECTIONAL CONTROL VALVE-PNEUMATIC OPERATED G1/8", G1/4", G3/8", G1/2"

These valves are basically used to control double  acting cylinder.

When one outlet in plugged, the valves function can be changed open or close.

They can also be used to control single acting cylinder. Suitable for SD solenoid valves.

MF

5/2, 5/3 WAY MANIFOLDS

Suitable SDF, SDA/B/C solenoid valves. O-ring and screw for interconnection are included in delivery.

¡@

BF

5/2, 5/3 WAY MANIFOLDS

Suitable for SDE solenoid valves.

¡@

SVA/SVB series

DIRECT ACTING SOLENOID VALVE

Valve body is brass forged. and Aluminum square bar. with spool direct acting designed provides quick response and spring return. Stainless steel stem provides longer reliability and suitable for various fluid. It can be installed by either vertical or horizontal position.

And the Ex-proof coils are available.

SVC  series

PILOT ACTING SOLENOID VALVE

Valve body is brass forged. with pilot acting designed having an ability to apply a bigger pressure. Stainless steel stem provides longer reliability and suitable for various fluid. It can be installed either vertical or horizontal position. And the EX-proof coils are available.

SVS series

PILOT ACTING SOLENOID VALVE

Valve body is lost-waxed SUS 304, with pilot acting designed having an ability to apply a bigger pressure. Stainless steel stem has a durable characteristic and suitable for drinking water, water, beverage, air oil(under 50cst), liquid, gas, chemical..etc.

Can assemble an Ex-proof coil to this valve if working under the dusty environment is required.

SVM

PILOT ACTING STEAM SOLENOID VALVE

Valve body is brass forged, with pilot acting designed for steam having an ability to apply a bigger pressure. Stainless steel stem has a durable characteristic and suitable for drinking, air. Max. temperature can reach to 185¢XC. Ex-proof coils with these valves are available.

SVP, SVT series

DIRECT SOLENOID VALVE

Valve body is PE, with Teflon diaphragm for ACID & ALKALI. Large, unrestricted air passage produce high flow rate and short response time. The good working reliability, and easy assembly is suitable for pure & beverage water, acid and chemical liquid.

SVB, SVC, SVS Series

FLANGE TYPE SOLENOID VALVE

Flange valve is suitable for a bigger piping connection, but nor for small port size such as 1/8", 1/4", 3/8".

¡@

UFR/L-02~04, UF.R.L-02~04 STANDARD SERIES

The series port size is available with G1/4"~G1/2". The units can be mounted on the air compressor from right or left side.

Filter and lubricator bowl designed for easy removal and installation. The filter is a sintered brass can be selected from 5~40micron.

¡@

¡@

UFR/L-06~08, UF.R.L-06~08 LARGE PORT SERIES

The series port size is available in G3/4" & G1" and suitable for larger equipment application. Piston constructive regulator provides a stability, reliability and without diaphragm broken problems. Easy-turn adjustment knob provides precise regulation control under any pressure required.

¡@

¡@

¡@

FRL-600 MINIATURE SERIES

The series is suitable for small equipment. Piston constructive regular provides a stability, reliability and without diaphragm broken problems. Pressure supplied range from 0.1~9.9 kgf/cm² and the filter associated with semi-auto drainer.

The filter is sintered bronze element can be selected from 5~40micron.

The suitable lubrication can elongate the using life and increasing the efficiency for air-operated equipment.

FAD-04~08 AUTOMATIC DRAIN

To use the difference in viscosity between air and water to operated a differential piston. Port size available G1/2"~G1". Filter element can be selected from 5~40micron. the drain outlet is 1/4" port at the bottom.

¡@

¡@

¡@

MAINTENANCE parts

¡@

MAV/MBV series

3/2, 5/2 WAY MANUAL OPERATED VALVES

Available in roller, turn selector, lever slector , palm button, finger button, and palm button with detent valve.

Can be used for pneumatic equipment as a emergency warning signal.

Installation aperture DIA 30£p or optional 25£p

Can be mounted on the bracket or panel.

HLV series

3/2, 4/3, 5/2, 5/3 WAY HAND CONTROL VALVES

Suitable for low to high flow application and requiring a manual or mechanical valve operation.

¡@

¡@

¡@

¡@

FPV series

3/2, 5/2 WAY FOOT PEDAL VALVES

An die cast aluminum body provides excellent durability and light in weight.

Foot pedal guards recommended for application to avoid from a accidental tramp and cause a result of damage or injury.

¡@

¡@

¡@

VALVES ACCESSORIES

Included exhaust valves, speed control valves, one direction check valves, shuttle valves, double pressure valves silencer, pu-tube.

¡@

¡@

¡@

¡@

¡@

¡@

AIR CYLINDER

ISO 6431 Series

ISO 6432 Series

¡@

¡@

¡@

PNEUMATIC FITTING

¡@